DICE iPod Integration Kit Installation Instructions for BMW 7
Series ’98-’01 (E38)
IF THE BELOW STEPS AND
SUBSEQUENT PROGRAMMING
ARE NOT PERFORMED EXACTLY
AS OUTLINED, YOUR DICE KIT
WILL NOT FUNCTION PROPERLY.
If you have any technical or operational questions
not related directly to the physical installation of
the Dice unit, please call Dice technical support
directly at 1.888.342.3999.
Before you begin the installation process, it is IMPERATIVE that you read
and understand the following information.
• The Dice module is a very complex piece of hardware that is
responsible for very complicated communications between your
iPod and your BMW. It will not just “work” once you plug it in. Much like
a computer, it requires patience and an understanding of the hardware
and its operation to use.
• Your iPod MUST be updated with the very latest firmware from
Apple. To get this software, you must have the latest version of iTunes
installed on your computer, connect your iPod, and update the software
through iTunes. Before you attempt to install your DICE kit, make SURE
that your iPod has the latest firmware installed or the DICE kit will exhibit
erratic operation.
1 of 15
Any reproduction, distribution, modification, or dissemination of these instructions without written permission from Bavarian Soundwerks is
expressly forbidden and a violation of international copyright law. Any violation will result in prosecution to the full extent available under
the law!
© 2006 Bavarian Soundwerks, LLC.
2195 Defoor Hills Rd., Suite D, Atlanta, GA 30318
P: 404.963.8857 | www.bavsound.com
• Your iPod must have a complete charge before you attempt to use it
for the first time with your DICE kit.
• The DICE kit requires a “boot up” period called initialization. NO
OPERATION during this period can be performed. You must wait until
both the vehicle and iPod have completed the initialization to use the
system.
• You must be PATIENT when operating the DICE iPod integration kit.
Because there is a great deal of communication occurring between your
car, DICE system, and iPod, operation is NOT instantaneous. With each
button press, you must wait a moment or two to allow the hardware to
communicate and function.
• The DICE system has a learning curve. If you do not read the included
operation manual, you will not be able to figure out how to use the system.
READ THE OPERATION INSTRUCTIONS FIRST!
• We recommend a “dry run” before you route the Dice cable to the front of
the car. Follow all wiring instructions below to ensure proper operation.
Tools Required: Available at any local auto parts store
• Panel Removal Tool
• Philips Head Screwdriver
• Radio Removal Tools
• Metric socket set
• Torx bit set
• Brain
The Process:
• Disconnect negative battery terminal before proceeding.
We’ll begin by disassembling the trunk first. From there, we’ll run the Dice cable to the front of the car, at
which point we will plug the cable into the Dice module. From the Dice module, we will route the cable that
connects the Dice module to your Ipod. Lastly, we will initialize the Dice system.
Begin by removing all items from the trunk of the vehicle. Make sure that all tail lights are in working order. If
not, now is a good time to replace them. Also remove the carpet that covers the floor of the trunk, as it will
reveal a couple of fasteners that will need removing.
File Type: PDF Download here